Spare parts for Magnus 800 electronics system

• E-box [S100/S300]

Description Part Number

• Plate picker cable 220-00899A

• E-wiring + cable Cab, assembly, DC, output,TH3 power mod 220-01938A

• Defeater wiring 220-00976A

• Status light LEDs universal board assembly 503-00774A

• CAN controller board 609-00273

• Safety relay board assembly 503-00701A

• Conveyor cable 220-01969A

• UDRC cable 220-01290A

• MSB can cable - 11m 220-01131A

• MSB can cable - 3m 220-01132A

• TMCE RS232 cable - 12m 220-01133A

• TMCE RS232 cable - 12m 220-01134A

• MSB cabinet fan 220-00912A

• Lower chamber cabinet fan 220-00914A

• Upper chamber cabinet fan 220-00914A

• Fan wiring 220-00913A

• MSB_C board assembly 503-00286A

To be use for machines serial number M81953 and lower

• MSB_C board assembly 503-00715B

• MSB motherboard 503-00514A

• PDB assembly 503-00024B

For machines with serial numbers lower than M8x1471, 

until stock depletion

• PDB assembly 503-00024C

For all machines

• DSSB board assembly 503-00096B

• Kollmorgen drum driver 500-03349A

• M800 8UP drum driver 500-13100A

Found on machines with serial number M83068 and higher.

• Resistive brake board 16 A 503-00710A

For all platesetter configurations from serial number M81699 

or lower except Z-speed machines.

• TMCE for Magnus 800 503-00161A

• Carriage driver board 10 A 503C01525B

• 48 V power supply for write laser on S100 and S300 platesetters 514-00308B

If unavailable, use replacement kit 514-00462B.

• 48 V power supply to system for S300 514-00309B

(TMCE, GMCE, carriage) and S100 (thermal head/carriage) 

platesetters If unavailable,use replacement kit 514-00524A.

• 24 V power supply for S100/S300 platesetters 514-00313B

If unavailable, use replacement kit 514-00524A.

• GMCE BRD,ASSY,GMCE,GIGABIT MCE 503-08443F

Note: For platesetters from serial number

M81700 and higher or any Z-speed (TH3) configuration.

• CMPTR,DUAL PORT COPPER GIGABIT ADAPTER 609-00489

(For Lenovo Boxes only see Series 1700 parts for Dell model)

• CAB,ETHERNET,SHIELDED,CAT5E,30M 216-00170

• Power supply [S100/S300]

Description     Part Number Where Used

• 48 V power supply for write laser 514-00308B PS

on S100 and S300 platesetters

If unavailable, use replacement kit 514-00462B.

• 48 V power supply to system for S300           514-00309B   PS

(TMCE, GMCE, carriage) and S100 (thermal head/carriage)

platesetters If unavailable, use replacement kit 514-00524A.

• 24 V power supply for S100/S300 platesetters   514-00313B PS

If unavailable, use replacement kit 514-00524A.

• Fuse 4A 250V, 3AB, fast blowing   182-00026 PS

• Fuse 10A 250V, slow blowing 6.3MM   175C31001 TH3

• TH3 power supply   500-02386E   TH3