Embedded Files
Magnus 800 head-z-stage and cooling system
Magnus 800 head-z-stage and cooling system
- Thermal Head
Description Part Number
EXT.OD=.36"WD=.045" L=2" MW (4 springs for mount TH2) 363B09010
CAB, assembly, MCE-EH 1.7 (data), TSM 220-01976A
CAB, assembly, MCE-EH 1.7 (ctrl.), TSM 220-01977A
Air tube, 4 mm O.D. yellow, restricted use 338-00061
(clean air hose used for the focus actuator air bearing for TH3)
Note: For Magnus 800 a 3-meter hose is required.
M-800 TH1 power cable 220-01992A
TH2 2400 P22 32-4186A
TH2 2540 P22 32-4196A
TH2 2400 P33 32-4222A
TH2 2540 P33 32-4223B
TH2.5 2400 P22 507-00134A
TH2.5 2400 P33 507-00265A
TH2.5 2540 P22 507-00132A
TH2.5 2540 P33 507-00266A
ASSY, EO, HEAD, TH1.7, 2400, 224, P33 32-4180A
ASSY, EO, HEAD, TH1.7, 2400, 224, P22 32-4182A
ASSY, EO, HEAD, TH3.0, 2400, 448 507-00216B
Head data cable for TH2 220-00181A
TH2 power cable 220-04197A
Head control TH2 cable, L=425 cm 220-02060A
TH2 debris vacuum hose 338-00044
(length 3.8 m)
TH3 debris vacuum hose 338-00013
(length 3 m)
Tube, flexible, split, NW=10, length 4 m (TH3) 338-00084
TH3 Fiber optic, duplex, LC-LC, 5 m, 50/125 216-01159
CAB, assembly, DC, output, TH3 power mod (TH3 PS to TH3) 220-01938A
TH3 AC supply cable 220-01935A
TH3 sensor harness 220-01914A
TH3 AC supply harness 220-01915A
- Head cooling system
Description Part Number
Pressure SW wiring 220-01940A
Note: For Z-speed only
Reservoir, mechanical assembly 50-2173A
Hose assembly TH to reservoir 299F9B674
Hose assembly TH to radiator 299F9B675
TH2/TH1.7 mechanical blower 500-03500B
(platesetter S/N M80024 to M81873, also order adapter
252-27835A and ring 15-3286 )
24 VDC coolant pump FCO 512-00837A
TH2 mechanical blower 504S3E464
(platesetter S/N M80019 to M80023)
TH2 mechanical blower 220-00954A
(platesetter S/N M80011 to M80018)
TH2/TH1.7 cooling system filter 514-00159A
TH2/TH1.7 cooling system heat exchanger 603-01186
TH2 cooling system pump 378-00049
(PUMP,2.5L/MIN,24V BRUSHLESS DC)
TH2/TH1.7 water pump + pack 510P1P973A
Note: Alternatively, you can order water pump (500-08762A),
which includes documentation.
Shock absorber (vibration) mount, OD=10,M/F M4 362-00048
Note: Water pump requires four shock absorbers
TH2/TH1.7 MGS800, water pump motor kit 514-00215A
(not including pump)US&C order 500-06139A
TH2/TH1.7 cooling hose o-ring 343A01004
Kit, Chiller, TF2500, TH3, No Coolant; 518-04963A
compatible for both 50Hz and 60Hz
Lens cleaning kit 04-0012B
TH3 drain outlet hose 500-05425A
TH3 cooling connector o-ring 59-3766
TH3 air bearing filter on manifold 332-00027
For more information, see Replacing the TH3 head air filters
Pink coolant, 40% ethylene glycol 82-1032A
Blue coolant, 30% ethylene glycol 402-00056B
Note: No longer available, but compatible with pink coolant 82-1032A.
Yellow coolant, 30% propylene glycol 090-00326A
- Z-stage
Description Part Number
Z stage locator 252-02530C
Z stage screw 300-00096
Z rod (TH2) 290A5A362
Z rod for Magnus 800 serial #s M82179 and higher 252-34527A
Z disk (0.2 - 0.3) for z rod 290A5A362 252-00206A
Z disk Quantum 0.15 to 0.4 for z rod 290A5A362 252-00207A
Z disk Quantum 0.15 to 0.4 for z rod 252-34527A 252-34526A
252-34528A (use 4 to 8 shims)
252-34823A
Z stage actuator solenoid valve (manifold valve) 334-00062
Assembly, mech.; cylinder, Z-stage, TH2 500-02620A
Page updated
Report abuse