Spare parts for Magnus 800 loading system

• Loading platform system

Description Part Number

• Belt, flat, conveyor, loading table 252-31765A

Note: For machines with serial numbers higher than M82006, 

or after implementing FCO 512-00750A.

• Assembly, mechanical, roller, loading platform 500-11620A

Note: For machines with serial numbers higher than M82006, 

or after implementing FCO 512-00750A.

• Loading platform O-ring kit 518-05728A

Note: For machines with serial numbers higher than M82006, 

or after implementing FCO 512-00750A.

• Spring, ext,OD=25.4,WD=3.43,MW,zinc coated 318-00251

• Assemby, mechanical, right, actuator, loading table 500-00656D

• Assemby, mechanical, left, actuator, loading table 500-04212D

• Kit, plate shutter, S300, 12" and 15" 518-04793A

• Ring, ret, ext, ID=12,SH D = 13-18, ST, DIN6799 318-00052

• Shaft, front, conveyor 252-02037A

• M800 loading conveyor shaft and bearing kit 514-00165A

• Loading platform safety cable 252-06913B

• Loading platform pre-load position left/right detector 503-00708A

• Loading platform punch position left/right detector 503-007087A

• Loading platform drum position left/right detector 503-00708A

• Loading platform left/right front detector 138A00100

• Plate on loading platform detector 138A00100

• Plate shutter home detector 503-00708A

• Loading platform - bottom detectors board 503-00708A

• Edge detection cable 220-00963A

• Edge detection cable 220-04170B

Note: For machines from serial number M82074 or higher, 

or after implementing  FCO 512-00773A.

• Centering harness 220-00595A

• Loading platform drum and pre-load bumper shims 252-02688A

• Loading platform short/long cylinder shims 252-02687A

• Loading platform bumper 360-00004

• Loading platform conveyor belt 252-02051A

• Loading platform conveyor motor coupling 348-00024

• Loading platform motor 220-00944A

• Loading platform long cylinder 330-00036

(speed controller elbow part number 334-00252 needs

 to be ordered separately)

• Loading platform short cylinder cylinder 330-00121

(speed controller elbow part number 334-00176 needs 

to be ordered separately)

• Plate shutter cylinder 500-02753A